How to Charge an Electric Scooter: 9 Easy Steps

Last updated:

This is the Scooter Dojo guide on: How to charge an electric scooter.

You might think this is common sense but many new users find it daunting to charge their electric scooters due to poorly written instruction manuals or lack of experience. Fortunately, this article provides a step-by-step guide to help users understand how to charge their electric scooters properly.

Manufacturers usually include instruction manuals with the purchase of electric scooters, but they may not always be helpful. This guide aims to provide clear and concise instructions to help users charge their electric scooters with ease. By following the steps outlined in this article, users can learn the exact procedure needed to charge their electric scooters.

How to Charge an Electric Scooter

Electric Scooter Charging Instructions

1. Get Ready To Charge

Before charging the electric scooter, it is essential to ensure that it has cooled down to prevent any damage to the battery. If the scooter has any liquid on it, it is crucial to let it dry off before putting the battery back to charging. This prevents any damage caused by moisture.

2. Charge in a Controlled Environment

It is important to charge the electric scooter in a room with a temperature that is not too hot or too cold. Charging a scooter under the sun can cause damage, and if left too long, an overheated battery may explode. Charging in the shade or indoors is recommended to prevent any damage to the battery.

3. Make Sure Your Scooter is Off

It is recommended to turn off the electric scooter while charging to prevent any damage to the battery. Simultaneously charging and discharging can damage the battery in the long run. If the scooter does not show charging status when turned off, the conventional way of charging can be used.

4. Use an OEM Charger

Using an original e-scooter charger is recommended to prevent any damage to the circuit or the battery. Using a replacement from another brand or even from within the same brand but for a different model can damage the battery or not charge it properly. It is essential to ensure that the charger matches the voltage of the battery to avoid any irreparable damage.

5. Plug the Charger into the Power Outlet First

It is usually better to plug the charger into a power outlet first before connecting it to the scooter. This prevents any short circuits or malfunctions from occurring in the device. If the manufacturer manual says that the charger should be connected directly to the scooter before connecting it to an electrical socket, follow the instructions carefully to avoid any damage.

6. Plug into the Scooter Charging Port

Once the charger is connected to the power outlet, the next step is to connect the other end to the scooter. The charging port cap should be taken off (if any) and the charging head should be plugged into the port. The indicator light or the screen on the scooter’s handlebar can provide an indication of charging.

7. Fully Charge the Battery

It is recommended to charge the electric scooter as often as possible to prevent getting stuck on the road without enough battery power. Although lithium-ion batteries can withstand partial charges, fully charging the battery before riding again reduces the number of times the battery is drained down, preventing any damage in the process.

8. Avoid Overcharging your Battery

Overcharging the battery can cause damage to the electric scooter. It is recommended to unplug the scooter soon after it is fully charged and not leave the charger plugged for too long. Some models offer overcharging protection, but it is still better to unplug the scooter as soon as it is fully charged.

9. Don’t Jump on the Ride Right After Charge

It is recommended to wait for at least five minutes after unplugging the scooter before riding it again. This ensures that the battery has cooled down to normal, preventing any damage caused by overheating.

These instructions can help in setting things properly for charging the electric scooter. Following these steps can prevent any damage to the battery or the scooter and increase the battery’s lifespan.

How Do Electric Scooters Charge?

Electric scooters are powered by lithium-ion batteries, which are also used in other electronic devices such as phones and laptops. The charging process is relatively simple and involves a power source that matches the voltage of the battery during charging. The charger throws forces a current to flow from positive to negative electrode through the battery. It charges the same way until the battery gets full.

Editor’s Pick
universal electric scooter charger

SafPow Universal Charger

  • Smart Replacement for All Brands
  • Various Plugs Included

If you want an efficient replacement charger that’s fast, reliable, and safe this is a safe bet.

How to Use a Quick Charger?

Quick charging features give users greater control and feedback for prolonged battery life. To use a Gotrax Scooter quick charger, follow these steps:

  • Plug the charger into a power outlet.
  • Adjust the amperes rate from the setting according to your scooter model.
  • Adjust the depth and set the value from 80% to 100%.
  • Turn on the switch of the charger.
  • Attach the charger head to the charging port of the scooter.
  • Complete the charging process until the battery is fully charged.

How to Charge an Electric Scooter at Home?

When charging an electric scooter at home, ensure that the charging station is well-ventilated and free from dust. Make sure it’s not too hot or cold, as this can cause charge malfunctions. Plug the charger into a power outlet and connect your scooter by inserting one end of the wire into an opening on either side of the bottom part. Take care with wires, so they don’t get tangled up when covering them over for safety.

How Long Does It Take to Charge a Scooter Battery?

The charging time for electric scooters varies depending on the model. The most popular electric scooters take 3-8 hours to charge fully. The average electric scooter charging time for a budget or popular electric scooter is 5 hours, and the average of all models being 6 hours 40 minutes.

Can You Overcharge an Electric Scooter?

Smart charging features will protect against overcharging and related damages from it. Still, you must be careful when plugging in your device, or else the battery may become too hot, which could cause damage. Always unplug an electric scooter once fully charged for maximum safety.

How to Charge a Razor Scooter?

To charge a Razor scooter, follow these instructions:

  • Use only the genuine charger that comes with your scooter.
  • Ensure that the charger and scooter are dry and at room temperature.
  • Avoid completely discharging the battery before charging to prolong its life.
  • Turn the scooter off.
  • Plug the charger into the outlet and wait for the green light.
  • Plug the charger head into the charging port of the scooter.
  • The light will turn red, indicating the charging process.
  • Wait for the scooter to get charged completely.
  • Take the plug out and wait for a few minutes before taking a ride.

How to Charge Electric Scooter without Charger?

Charging an electric scooter without a charger is not an optimal solution, but it is possible in certain situations. One can use the car battery as a power source to charge the scooter battery. However, it is important to follow the correct steps to avoid any damage to the battery or the scooter.

Charging Electric Scooter with Car Battery

To charge the electric scooter battery using the car battery, one needs to follow these easy steps:

  1. Turn off the scooter before anything.
  2. If the scooter has a removable battery, take it out from the scooter. In the case of a fixed battery, removing it may void the warranty.
  3. Find out the positive and negative terminals of the battery. Positive has a + sign, while negative has a – sign.
  4. Attach the jumper cables between both batteries. Take the red cable first and attach it to the scooter battery on the + sign terminal.
  5. Connect the black cable with the car battery. Do not attach this cable with the scooter battery and attach it to any bare metal or grounding point.
  6. Start the car engine and run it for a few minutes while keeping the battery on charge.
  7. Once the charging gets completed, remove the black wire from the ground and don’t touch it yet.
  8. Remove the red cable from the scooter battery, and don’t let it touch the black cable.
  9. Now remove the red and black terminals from the car battery.

It is important to note that the source (car) battery needs to have a higher voltage than the electric scooter battery to mediate charging.

How Long Does an Electric Scooter Charge Last?

The duration of an electric scooter charge depends on the mode in which it is operated. If speed is not a concern, and saving energy is the goal, then it is possible to ride on a power-saving mode for up to 6 hours with minimal charge. However, in fast speed mode, the charge lasts for only around 2 hours.

It is important to switch modes to extend the time that one can ride an electric scooter. This is because faster speeds use up more voltage, and higher quality batteries lose their ability quickly once they run out. This usually happens after just 50 minutes, depending on the type of scooter one has or rides while riding swiftly down city streets.

In conclusion, charging an electric scooter without a charger is possible but not ideal. It is important to follow the correct steps to avoid any damage to the battery or the scooter. Additionally, it is important to use eco-modes to extend the ride time on your electric scooter and reduce the frequency of having to recharge.

🛴 Join The Dojo
For FREE scooters and exclusive discounted prices