How to Remove Speed Limiter on Electric Scooter: Step by Step

Last updated:

This is our step by step guide to How to Remove Speed Limiter on Electric Scooter.

If you own an electric scooter, you may have noticed that once you get up to a certain speed it just stops accelerating, even when it seems like it should keep going. The reason for this is the speed limiter it has installed. A speed limiter is a safety feature that is designed to prevent you from exceeding a certain speed, which can help to keep you safe while riding. In this article, we’ll teach you how to remove the speed limit from your scooter but before we do let’s discuss why you should think twice before doing it.

How to Remove Speed Limiter on Electric Scooter

What is a Speed Limiter?

A speed limiter is a device that is designed to restrict the maximum speed of an electric scooter. It works by limiting the amount of power that is delivered to the motor, which prevents the scooter from going faster than a certain speed. The maximum speed that is allowed will vary depending on the model of your electric scooter, but it is typically around 15-20 mph.

Why are Speed Limiters Important?

Speed limiters are an essential safety feature on electric scooters. They help to prevent riders from going too fast, which can be dangerous and increase the risk of accidents. Going too fast can also cause excessive wear and tear on your scooter, which can lead to mechanical problems and reduce the lifespan of it.

Can You Remove a Speed Limiter?

While it is possible to remove a speed limiter from your electric scooter, it is not recommended. Doing so can be dangerous and can increase the risk of accidents. Additionally, removing a speed limiter may also be illegal, depending on where you live. If you want to go faster on your electric scooter, it is best to look for a model that has a higher maximum speed or to upgrade your scooter’s motor or battery.

Types of Speed Limiters

When it comes to electric scooters, there are two main types of speed limiters: software-based and hardware-based.

Software-Based Speed Limiters

Software-based speed limiters are embedded in the scooter’s firmware, and they are designed to limit the maximum speed of the scooter. These speed limiters are usually put in place to comply with local regulations or safety standards. Most electric scooters have a software-based speed limiter that limits the top speed to around 15-20 mph.

To remove a software-based speed limiter, you need to modify the firmware of the scooter. This can be a complex process, and it requires technical expertise. Modifying the firmware can also void the warranty of the scooter, so it’s important to proceed with caution.

Hardware-Based Speed Limiters

Hardware-based speed limiters are physical components that are installed in the scooter to limit its speed. These speed limiters are usually found in entry-level or budget electric scooters. They are designed to limit the top speed of the scooter to ensure safety and prevent accidents.

To remove a hardware-based speed limiter, you need to identify the component that is limiting the speed and remove it. This can be a simple process, but it requires some technical knowledge. It’s important to note that removing a hardware-based speed limiter can void the warranty of the scooter and may also make it unsafe to ride.

In summary, speed limiters are an important safety feature of electric scooters. While they can be frustrating for some riders, they are designed to prevent accidents and ensure the safety of riders. If you want to remove a speed limiter from your electric scooter, it’s important to proceed with caution and follow the appropriate steps.

Safety Precautions

When removing the speed limiter on your electric scooter, it is important to take certain safety precautions to avoid accidents and ensure your own safety. Here are some tips to keep in mind:

  • Always wear protective gear such as a helmet, knee and elbow pads, and sturdy shoes.
  • Make sure you are familiar with the workings of your electric scooter and have read the manual before attempting to remove the speed limiter.
  • Disconnect the battery before opening the speed controller to avoid electric shock.
  • Use the proper tools and techniques to avoid damaging the scooter’s components.
  • Test your scooter in a safe and open area to ensure that it is functioning properly after removing the speed limiter.
  • Be aware of local laws and regulations regarding electric scooters and their maximum speed limits.

By following these safety precautions, you can minimize the risk of accidents or injuries while removing the speed limiter on your electric scooter. Remember to always prioritize your safety and the safety of others when making modifications to your scooter.

Legal Implications

Removing the speed limiter on an electric scooter may have legal consequences and potential risks. It is essential to note that tampering with or modifying the speed limiter may violate local laws and regulations, and you may face fines or penalties for doing so.

In some states, it is illegal to operate an electric scooter that exceeds the maximum speed limit set by local laws and regulations. Removing the speed limiter can potentially make the scooter unsafe to ride and cause accidents or injuries. Additionally, it may void the manufacturer’s warranty, which can lead to costly repairs or replacements.

It is crucial to understand the local laws and regulations regarding electric scooters before attempting to remove the speed limiter. You should also check with the manufacturer to see if removing the speed limiter will void the warranty or cause any other issues.

Tools Required

To remove the speed limiter on your electric scooter, you’ll need a few tools. Here are the necessary tools that you’ll need:

1. Pliers

Pliers are a must-have tool for removing the speed limiter on your electric scooter. You’ll need them to cut the white cables that limit the speed of your scooter.

2. Screwdriver

You’ll need a screwdriver to open up the deck casing of your electric scooter. This will allow you to access the wires that need to be cut.

3. Allen wrench

An Allen wrench is needed to remove the bolts that hold the deck casing in place. You’ll need to remove these bolts to access the wires that need to be cut.

4. Multimeter

A multimeter is an optional tool that you can use to test the wires before you cut them. This will help you to avoid damaging your scooter’s electrical system.

5. Wire cutters

Wire cutters are another optional tool that you can use to cut the wires that limit the speed of your electric scooter. They are more precise than pliers and can help to prevent damage to other wires.

Overall, these tools are relatively common and easy to find. You may already have them in your toolbox. If not, you can purchase them at your local hardware store or online.

Locating the Speed Limiter

To remove the speed limiter on your electric scooter, you need to locate it first. The speed limiter is a device that restricts the speed of your electric scooter to a certain limit. It is usually found in the controller or the motor of the scooter.

To locate the speed limiter, you need to follow these steps:

  1. Consult the manual: The manual that comes with your electric scooter should have information on the location of the speed limiter. Check the manual first before proceeding.
  2. Check the controller: The controller is the brain of your electric scooter and is responsible for regulating the speed. The speed limiter may be located in the controller. To access the controller, you may need to remove the deck casing.
  3. Check the motor: The motor is another possible location for the speed limiter. To access the motor, you may need to remove the rear wheel or the cover of the motor.
  4. Look for wires: The speed limiter is usually connected to wires that limit the speed of the scooter. Look for wires that are white in color, as these are commonly used for speed limiting.

Once you have located the speed limiter, you can proceed with removing it. However, it is important to note that removing the speed limiter can be dangerous and may void your warranty. Make sure you understand the risks before attempting to remove the speed limiter.

Disconnecting the Speed Limiter

If you want to remove the speed limiter on your electric scooter, one of the most common ways to do it is by disconnecting the speed limiting wire. This wire is responsible for limiting the speed of your scooter, and disconnecting it will allow your scooter to run at its maximum speed.

To disconnect the speed limiting wire, you will need to open the speed controller of your electric scooter. You will see several wires, and one of these wires is the speed limiting wire. The color of this wire may vary depending on the make and model of your scooter, so it’s important to consult the user manual or do some research to identify it.

Once you have located the speed limiting wire, you can unplug it from the speed controller. This will disable the speed limiter, allowing your electric scooter to run at its full speed potential. However, keep in mind that removing the speed limiter may make your scooter unsafe to ride, especially if you are not experienced in riding at high speeds.

It’s also worth noting that removing the speed limiter may void your warranty, so make sure to check with the manufacturer before making any modifications to your scooter. Additionally, some countries or states have laws and regulations regarding the maximum speed of electric scooters, so be sure to check your local laws before removing the speed limiter.

Testing the Scooter

Once you have removed the speed limiter from your electric scooter, it is important to test it thoroughly to ensure that it is functioning correctly and safely. Here are some steps you can take to test your scooter:

  • Check the scooter’s settings: Make sure that all of the settings on your scooter are correct and that the scooter is functioning as it should. Check the manual for your specific scooter to see what settings you need to adjust.
  • Inspect the scooter: Look over your scooter carefully to make sure that everything is in good working order. Check the brakes, tires, and any other important components to ensure that they are functioning correctly.
  • Test ride the scooter: Take your scooter for a test ride to make sure that it is performing as expected. Start with a slow speed and gradually increase your speed to make sure that the scooter is accelerating smoothly and that the brakes are working properly.
  • Check the scooter’s speedometer: Use the speedometer on your scooter to make sure that it is accurately measuring your speed. If the speedometer is not working correctly, you may need to calibrate it or have it repaired.
  • Check the battery: Make sure that your scooter’s battery is fully charged and that it is providing enough power to the motor. If the battery is not working correctly, you may need to replace it.

By following these steps, you can ensure that your electric scooter is safe and functioning correctly after removing the speed limiter.

Maintenance After Removal

Once you have successfully removed the speed limiter from your electric scooter, it is important to perform regular maintenance to ensure the longevity and optimal performance of your scooter. Here are some maintenance tips to keep in mind:

Battery Maintenance

The battery is a crucial component of your electric scooter and should be maintained properly. Here are some tips to keep your battery in good condition:

  • Charge your battery regularly and avoid overcharging
  • Keep the battery clean and dry
  • Store the battery in a cool, dry place
  • Replace the battery when it starts to lose its charge quickly

Tire Maintenance

The tires of your electric scooter should be checked regularly for wear and tear. Here are some tips to keep your tires in good condition:

  • Check the tire pressure regularly and inflate as needed
  • Inspect the tires for any signs of wear and tear, such as cracks or punctures
  • Replace the tires when they become worn or damaged

Brake Maintenance

The brakes of your electric scooter are essential for your safety and should be maintained properly. Here are some tips to keep your brakes in good condition:

  • Check the brake pads regularly and replace them when they become worn
  • Adjust the brake cables as needed to ensure proper braking
  • Test the brakes regularly to ensure they are working properly

Other Maintenance

In addition to the above, there are other components of your electric scooter that should be checked regularly for wear and tear. These include the motor, chain, and frame. Here are some tips to keep these components in good condition:

  • Check the motor regularly for any signs of wear or damage
  • Lubricate the chain regularly to ensure smooth operation
  • Inspect the frame for any cracks or damage

Potential Risks and Challenges

Removing the speed limiter on an electric scooter can have legal implications and potential risks. It is crucial to consider the dangers involved before attempting to remove the speed limiter on your electric scooter. Here are some potential risks and challenges you may face:

  • Safety concerns: Electric scooters are designed to operate within a specific speed range to ensure the safety of the rider and other road users. Removing the speed limiter can increase the speed of the scooter beyond its intended range, compromising its stability and safety. This can lead to accidents, injuries, or even fatalities.
  • Legal implications: In many countries, electric scooters are subject to speed regulations and other safety standards. Removing the speed limiter can violate these regulations, which can result in legal consequences such as fines, impounding of the scooter, or even criminal charges.
  • Warranty voiding: Removing the speed limiter can also void the warranty of your electric scooter. If you experience any issues or defects with your scooter after removing the speed limiter, the manufacturer may not cover the repairs or replacements.
  • Technical challenges: Removing the speed limiter on an electric scooter may require technical skills and knowledge. If you are not familiar with the electrical components and wiring of your scooter, attempting to remove the speed limiter can cause damage to the scooter or even pose a safety hazard.
  • Battery life reduction: Increasing the speed of your electric scooter can also reduce the battery life. The faster you ride, the more energy your scooter consumes, which can result in shorter battery life and more frequent recharging.

It is essential to consider these potential risks and challenges before attempting to remove the speed limiter on your electric scooter. Always prioritize safety and legality when using your electric scooter.

How to Reinstall Speed Limiter

If you have removed the speed limiter on your electric scooter and now want to reinstall it, there are a few steps you can take to do so. Reinstalling the speed limiter can help ensure that you are riding your scooter safely and within legal speed limits.

The process of reinstalling the speed limiter will depend on the brand and model of your electric scooter. Some scooters may have a physical speed limiter that can be reconnected, while others may require you to modify the firmware or replace certain components.

Here are some general steps to follow when reinstalling the speed limiter on your electric scooter:

  1. Identify the type of speed limiter: Before you begin, you’ll need to determine the type of speed limiter on your scooter. This may involve consulting the user manual or contacting the manufacturer for assistance.
  2. Access the control panel or firmware: Depending on the type of speed limiter, you may need to access the control panel or firmware to reinstall it. This may require you to remove the scooter’s deck casing or use specialized software.
  3. Reconnect or modify the speed limiter: Once you have access to the control panel or firmware, you can either reconnect the physical speed limiter or modify the firmware to reinstall the limiter.
  4. Test the speed limiter: After reinstalling the speed limiter, it’s important to test it to ensure that it’s working properly. Take your scooter for a test ride and make sure that it doesn’t exceed the legal speed limit.

Remember that removing or modifying the speed limiter on your electric scooter can be dangerous and may void your warranty. If you’re unsure about how to reinstall the speed limiter, it’s best to consult a professional or contact the manufacturer for guidance.

Alternative Solutions To Make Your Scooter Faster

If you’re not comfortable with removing the speed limiter on your electric scooter, there are some alternative solutions that you can consider. In this section, we’ll take a look at two of the most effective alternative solutions for increasing the speed of your scooter.

Upgrading the Battery

One of the easiest ways to increase the speed of your electric scooter is by upgrading its battery. Most electric scooters come with a standard battery that provides a certain amount of power and speed. However, you can upgrade to a higher-capacity battery that provides more power and speed.

When upgrading your battery, make sure to choose one that is compatible with your scooter’s motor and controller. You may also need to upgrade your charger to ensure that it can handle the higher-capacity battery.

Changing the Controller

Another option for increasing the speed of your electric scooter is by changing its controller. The controller is responsible for regulating the speed and power of the motor. By upgrading to a more powerful controller, you can increase the speed of your scooter.

However, changing the controller is a more complex process than upgrading the battery. You’ll need to make sure that the new controller is compatible with your scooter’s motor and battery. You may also need to reprogram the controller to ensure that it works properly with your scooter.

Both of these alternative solutions can be effective for increasing the speed of your electric scooter. However, they may not be as effective as removing the speed limiter. If you’re looking for the fastest possible speed, removing the speed limiter is still the best option.

🛴 Join The Dojo
For FREE scooters and exclusive discounted prices